Site map 20 September 2020, 13:09

Inzhekhim Kazan

01.04.2014

Delivery of separators for a vacuum generating system of the atmospheric vacuum distillation unit at “Oil Refinery” j.s.c. Brod, Bosnia and Herzegovina

EPC “Ingehim” delivered separators for a vacuum generating system of the atmospheric vacuum distillation unit to “Oil Refinery” j.s.c. Brod, Bosnia and Herzegovina. Detailed engineering design of the separators was developed by specialists of EPC “Ingehim”. Internals of the separators were designed and fabricated at EPC “Ingehim” manufacturing facility. EPC “Ingehim” accomplished supervised installation of the equipment.

02.12.2013

Participation in the 7th Annual International Symposium Euro-Eco-2013 “Environmental, Engineering-Economic and Legal Aspects for Sustainable Living” held on November 28-29, 2013 in Hanover, Germany

EPC “Ingehim” participated in the 7th Annual International Symposium Euro-Eco-2013 “Environmental, Engineering-Economic and Legal Aspects for Sustainable Living” held on November 28-29, 2013 in Hanover, Germany.  Professor M.I. Farakhov (EPC “Ingehim” director) and professor A.G. Laptev (EPC “Ingehim” vice-director in charge of science) chaired sections: “Ecological problems of power engineering” and “Modernization of industrial plants” and made presentations at the respective sections. As recognition of scientific achievements, Leibniz medals were awarded to both Dr. Farakhov and Dr. Laptev. By the decision of Scientific Council of the European Scientific Society and Presidium of the European Academy of Natural Sciences, Dr. Farakhov and Dr. Laptev received status of Honourable European Scientists in the city of Hanover.

23.07.2013

Declaration of conformity with the Technical Regulation of the Customs Union 010/2011 was prepared and registered for internals of separation equipment

In line with the Technical Regulation of the Customs Union 010/2011 “On safety of machines and equipment” having come into effect on February 15, 2013, declaration of conformity with the above regulation for internals of separation equipment (liquid distributor, flow leveler, coalescer, vertical wire mesh demister, plate-type packing) has been prepared and registered

03.12.2012

Recertification of EPC “Ingehim” hydraulic test stand is accomplished

Accomplished is recertification of EPC “Ingehim” hydraulic test stand, designed for testing strength and hermeticity of pressure vessels and pressure apparatuses

03.07.2012

Recertification of conformance of EPC “Ingehim” quality management system to ISO 9001:2008 requirements was accomplished

EPC “Ingehim” quality management system successfully passed recertification. Its conformance to ISO 9001:2008 requirements was confirmed. Certification authority – OSSK “Tatsert”, Kazan, Russia

24.04.2012

A presentation entitled “Pervaporation-based membrane technologies in producing absolute ethanol” took place in the main office of EPC “Ingehim in Kazan, Russia

In the main office of EPC “Ingehim (Kazan, Russia), a presentation entitled “Pervaporation-based membrane technologies in producing absolute ethanol” was held. The following persons were present: -director of the Dutch company Pervatech BV, Mr. Frans Velterop;
-chairman of Department of Membrane Technology of Mendeleyev University of Chemical Technology of Russia, prof. G.G. Kagramanov;
-president of Kazan National Research Technological University, prof. G.S. Dyakonov;
-chairmen of departments of Kazan National Research Technological University: A.V. Klinov, F.M. Gumerov, N.I. Miroshkin;
-key spesialists of JSC “Nizhnekamskneftekhim” and JSC “Kazanorgsintez”

02.04.2012

Absolute ethanol is produced by pervaporation

Absolute ethanol is produced using our own in-house experimental pervaporation unit

27.02.2012

Completed is redesigning of deaerator at JSC “TGK-16” – “Kazanskaya TEC-3” (Kazan, Russia) through implementation of EPC “Ingehim” internals

Works on redesigning of deaerator DSA-300/75 at JSC “TGK-16” – “Kazanskaya TEC-3” (Kazan, Russia) are completed with implementation of EPC “Ingehim” internals. The works received a positive feedback from the Customer

31.10.2011

EPC “Ingehim” hydraulic test stand passed certification

EPC “Ingehim” hydraulic test stand, designed for testing strength and hermeticity of pressure vessels and pressure apparatuses, passed certification successfully

05.07.2011

EPC “Ingehim” received certificate granting permission to perform works as prime contractor

EPC “Ingehim” received membership within the Russian Nonprofit Partnership “Self-Regulatory Organization of the Russian Federation” which issued a certificate granting permission to EPC “Ingehim” to perform works as prime contractor (works on organization of construction, redesigning and complete overhauling at the plants and apparatuses of the oil and gas complex)