Dissertations
Ph.D. dissertations defended by Ingehim employees
- Azizov S.B. Hydrodynamics and mass transfer in apparatuses with the cyclic working regime. Ph.D. thesis, Kazan, Russia, 2007.
- Akberov R.R. Numerical modeling of internal fluid flows using the finite-element method. Ph.D. thesis, Kazan, Russia, 2000.
- Alekseev K.A. Hydrodynamics of fluid flow in packed-type static mixers. Ph.D. thesis, Kazan, Russia, 2016.
- Akhlyamov M.N. Mathematical modeling of flow of multicomponent mixture of gases using the 3-D problem definition. Determining complementary error for efflux coefficient resulting from shrinkage of straight parts’ lengths. Ph.D. thesis, Kazan, Russia, 2006.
- Baiguzin F.A. Centrifugal separation of polydisperse heterogeneous systems. Ph.D. thesis, Kazan, Russia, 2000.
- Burmistrov D.A. Intensification of the process of isobutylene production by catalytic decomposition of tert-butyl alcohol. Ph.D. thesis, Kazan, Russia, 2019.
- Galiullin E.A. Development of technology for the production of road bitumen from ultra-viscous oil. Ph.D. thesis, Kazan, Russia, 2020.
- Grishin D.N. Laws governing mechanics of two-phase radial flows through packings of centrifugal extractors. Ph.D. thesis, Kazan, Russia, 2007.
- Islamkhuzin D.Ya. Formation and dispersion of vapor clouds of liquefied hydrocarbon gases at the time of technogenic catastrophes. Ph.D. thesis, Kazan, Russia, 2003.
- Karpeev S.V. Reducing energy consumption and modernization of a unit for fractionation of the formaldehyde-methanol-water mixture. Ph.D. thesis, Kazan, Russia, 2001.
- Kuznetsov V.A. Increasing efficiency of water-based degassing stage in production of synthetic rubbers by solution polymerization. Ph.D. thesis, Kazan, Russia, 2004.
- Lapteva E.A. Energy saving at the heat technology system destined for separation of ethanolamines. Ph.D. thesis, Kazan, Russia, 2009.
- Latypov D.R. Dehydration of water-alcohol mixtures by polymer pervaporation membranes with a selective layer of polyurethanes based on amino esters of orthophosphoric and boric acids. Ph.D. thesis, Kazan, Russia, 2024.
- Maryakhin N.N. Influence of geometry of structured corrugated packing on fluid flow characteristics. Ph.D. thesis, Kazan, Russia, 2003.
- Fazlyev A.R. Dehydration of alcohols by pervaporation using hybrid silica membranes. Ph.D. thesis, Kazan, Russia, 2016.
- Farakhov M.M. Hydraulic and mass transfer characteristics of the packings “Inzhekhim” for the contact of gas and liquid in a column apparatus. Ph.D. thesis, Kazan, Russia, 2018.
- Farakhov T.M. Multifunctional contact devices for mixing boiler fuel with additives and cleaning gas emissions from thermal power plants. Ph.D. thesis, Kazan, Russia, 2011.
- Farakhova A.I. Mathematical model, hardware design and improvement of efficiency of liquids purification from the dispersed phase at thermal power plants and industrial enterprises. Ph.D. thesis, Kazan, Russia, 2013.
- Khayrutdinov V.F. Thermodynamic foundations and technological characteristics of the process of nanodispergating polycarbonate using the SAS method. Ph.D. thesis, Kazan, Russia, 2010.
- Khasanov R.M. Mathematical modeling of fluid flow through a pipe with a diaphragm installed in the pipe. Complementary error for efflux coefficient. Ph.D. thesis, Kazan, Russia, 2006.
- Chekmaryov A.S. Acoustical treatment of clay suspensions for improving processing properties of clay from the Shelanga field. Ph.D. thesis, Kazan, Russia, 2010.
- Shafikov I.S. Investigation on plastic forming of parts from section shapes; development of a computer-aided-design system for designing a technology and attachments. Ph.D. thesis, Kazan, USSR, 1983.
- Shigapov I. M. Increasing efficiency of an assembly for alkali cleaning of pyrogas at an ethylene production plant. Ph.D. thesis, Kazan, Russia, 2000.
D.Sc.* dissertations defended by Ingehim employees
- Laptev A.G. Modeling of elementary transport phenomena in two-phase systems and determining efficiency of heat and mass transfer of industrial columns. D.Sc. thesis, Kazan, Russia, 1995.
- Farakhov M.I. Energy and resource saving modernizations of units destined for fractionation and cleaning of gases and liquids at industrial enterprises of the oil and gas complex. D.Sc. thesis, Kazan, Russia, 2009.
- Dakhnavi E.M. Optimization of combined production of phenol and acetone, integrated conversion of by-products into reactants suitable for oil production. D.Sc. thesis, Kazan, Russia, 2011.
- Khairutdinov V.F. Thermodynamic foundations and technological characteristics of dispersion, extraction and impregnation processes using supercritical fluid media as applied to the tasks of polymer chemistry, pharmaceuticals and petrochemistry. D.Sc. thesis, Kazan, Russia, 2019.
- Farakhov T.M. Hydromechanical and heat and mass transfer characteristics of modernized apparatus with surface and volumetric intensifiers. D.Sc. thesis, Kazan, Russia, 2021.
Dissertations supervised by Ingehim employees
- Afanasiev I.P. Energy saving in industrial hydrocarbon processing units. Ph.D. thesis, Kazan State Power Engineering University, Kazan, Russia, 2006.
- Akhmetov R.N. Similarity of momentum and heat transfer in a turbulent boundary layer with intensification elements in the channels of heat transfer equipment. Ph.D. thesis, Kazan State Power Engineering University, Kazan, Russia, 2010.
- Ayupov D.G. Mathematical model of separating ability and reconstruction of trayed extractors. Ph.D. thesis, Kazan National Research Technological University, Kazan, Russia, 2000.
- Baglai V.F. Modeling of fractionation of hydrocarbon mixtures and reconstruction of columns of an engine fuel production unit. Ph.D. thesis, Kazan National Research Technological University, Kazan, Russia, 1997.
- Basharov M.M. Energy-saving modernization of heat-using installations in the production of phenol. Ph.D. thesis, Kazan State Power Engineering University, Kazan, Russia, 2011.
- Basharov M.M. Energy and resource efficient modernization of heat and mass transfer apparatuses and installations in the petrochemical complex. D.Sc. thesis, Kazan State Power Engineering University, Kazan, Russia, 2019.
- Borodai E.N. Resource saving technology for utilization of slime resulting from water conditioning at thermal power stations. Ph.D. thesis, Kazan State Power Engineering University, Kazan, Russia, 2011.
- Gavrilov A.S. Determination of heat losses and reduction of energy consumption of gas (vapor) liquid apparatuses at enterprises of the fuel and energy complex. Ph.D. thesis, Kazan State Power Engineering University, Kazan, Russia, 2010.
- Guseva E.V. Energy-saving modernization of the heat-technological scheme of the demethanization unit in ethylene production. Ph.D. thesis, Kazan State Power Engineering University, Kazan, Russia, 2005.
- Demidova Yu.M. Resource saving technology for electrical water treatment for mini-CHP. Ph.D. thesis, Kazan State Power Engineering University, Kazan, Russia, 2009.
- Dolgov A.N. Enhancing efficiency of atmospheric thermal deaerators of thermal electric power stations. Ph.D. thesis, Kazan State Power Engineering University, Kazan, Russia, 2012.
- Dolgova A.N. Energy saving at installations for drying and separation of hydrocarbon gases of enterprises of the fuel and energy complex. Ph.D. thesis, Kazan State Power Engineering University, Kazan, Russia, 2013.
- Dudarovskaya O.G. Models of intensified heat and mass transfer and displacement of media in channels with chaotic packed beds. Ph.D. thesis, Kazan State Power Engineering University, Kazan, Russia, 2016.
- Zvereva E.R. Improving the efficiency of fuel oil use at thermal power plants and boiler houses. D.Sc. thesis, Kazan State Power Engineering University, Kazan, Russia, 2013.
- Ilyashenko E.B. Modeling of a pyrogas cooling process and reconstruction of a heat exchange column of the gas separation unit at the Ethylen plant. Ph.D. thesis, Kazan National Research Technological University, Kazan, Russia, 1998.
- Iskhakov A.R. Improving the efficiency of gas purification processes from the dispersed phase and harmful impurities in combined apparatuses. Ph.D. thesis, Kazan National Research Technological University, Kazan, Russia, 2016.
- Ishmurzin A.V. Increasing the efficiency and reducing the energy consumption in separation units intended for water-conditioning and units intended for production of hydrocarbon fuels. Ph.D. thesis, Kazan State Power Engineering University, Kazan, Russia, 2002.
- Kostyleva E.E. Energy saving in hydrocarbon processing and effective disposal of heavy residues of hydrocarbon fuels. Ph.D. thesis, Kazan State Power Engineering University, Kazan, Russia, 2004.
- Malkovskiy P.A. Improving existing technologies and apparatuses for gas condensate treatment. D.Sc. thesis, Kazan National Research Technological University, Kazan, Russia, 2002.
- Nikolaeva L.A. Adsorption treatment of industrial wastewater using modified carbonate sludge. D.Sc. thesis, Ivanovo State Chemical Engineering University, Ivanovo, Russia, 2017.
- Runov D.M. Improving the energy efficiency of a hydrocarbon gas cooling unit at a gas processing plant. Ph.D. thesis, Kazan State Power Engineering University, Kazan, Russia, 2015.
- Saitbatalov M.V. Thermohydraulic efficiency of cooling of gases and liquids at direct contact of the phases in the film regime of heat transfer units. Ph.D. thesis, Kazan State Power Engineering University, Kazan, Russia, 2014.
- Sergeeva E.S. Comprehensive use of peat at thermal power plants. Ph.D. thesis, Kazan State Power Engineering University, Kazan, Russia, 2008.
- Solodov P.A. Modernization of instrumentation and a flowsheet for an engine fuel production unit. Ph.D. thesis, Kazan National Research Technological University, Kazan, Russia, 2001.
- Taraskin M.M. Energy-saving removal of the liquid phase from gases at heat-technological installations at enterprises of the fuel and energy complex. Ph.D. thesis, Kazan State Power Engineering University, Kazan, Russia, 2012.
- Shakirova A.Kh. Calculation method and improvement of hardware design for removal of dissolved gases and finely dispersed phase from water in TPP bubbling apparatuses. Ph.D. thesis, Kazan State Power Engineering University, Kazan, Russia, 2014.
- Yasaveev Kh.N. Reconstruction of debutanizer and iso-pentane column in a gas fractionation plant with the purpose of increasing efficiency of distillation. Ph.D. thesis, Kazan National Research Technological University, Kazan, Russia, 1998.
- Yasaveev Kh.N. Increasing efficiency of an assembly of units for gas condensate treatment. D.Sc. thesis, Kazan National Research Technological University, Kazan, Russia, 2004.
*In Russia, most ex-republics of the former USSR and several post-socialist countries, there is a post-Ph.D. degree entitled Doctor of Sciences, D.Sc., (“Doktor nauk” in Russian) awarded in recognition of a substantial and sustained contribution to scientific knowledge; individuals pursuing the D.Sc. degree must defend a D.Sc. dissertation (in addition to Ph.D. dissertation defended earlier). The degree has no American equivalent but does have a Western equivalent in the degree of Doctor of Science in the sense in which the D.Sc. is used in the Commonwealth of Nations (e.g. India, etc).